TS2180/TS2280 deep hole drilling and boring machine
The machine is a deep-hole working machine, which can support the process of drilling, boring and trepanning for big diameter workpiece. During the working process, the workpiece rotates slowly and the tool rotates in high-speed and feed.
It uses BTA during the drilling work and forward chip removal while boring. As for the trepanning process we use extra chip removal technique, which demand professional trepanning tools. According to the needs of manufacturing, a boring spindle box is equipped to the machine so the boring tools could rotate and feed.
Advantages
Item | Unit | TS2180 | TS2280 | |
Capacity | Range of drilling diameter | mm | 50-150 | / |
Maximum boring diameter | mm | 800 | 800 | |
Maximum boring depth | m | 1-16 | 1-16 | |
Range of trepanning diameter | mm | 150-500 | 150-500 | |
Workpiece clamp diameter range | mm | 270-1200 | 270-1200 | |
Spindle | Center height of spindle | mm | 800 | 800 |
Spindle bore of headbox | mm | 120 | 120 | |
Taper hole of spindle | mm | 140,1:20 | 140,1:20 | |
Range of spindle speeds | r/min | 1-200 (stepless in 3 gears | 1-200 (stepless in 3 gears | |
Drill box | Spindle bore of drill box | mm | 120 | / |
Taper hole of drill box spindle | mm | 140,1:20 | / | |
Range of drill box speed | r/min | 16-270(12kinds) | / | |
Feed | Range of feed speed stepless | mm/min | 5-500 | 5-500 |
Rapid speed of pallet | m/min | 2 | 2 | |
Motor | Main motor power | kw | 55 | 55 |
Motor power of drill box | kw | 45 | No | |
Motor power of hydraulic pump | kw | 1.5kw, n=1440r/min | 1.5kw, n=1440r/min | |
Motor power of rapid speed | kw | 7.5 | 7.5 | |
Feed motor power | kw | 7.5(servo motor) | 7.5(servo motor) | |
Motor power of cooling pump | kw | 11*2+5.5*2 | 7.5*3 | |
Others | Span of guideway | mm | 1250 | 1250 |
Rated pressure of cooling system | MPa | 2.5 | 0.36 | |
Flow of cooling system | L/min | 200.400.600.800 | 300.600.900 | |
Rated working pressure of hydraulic system | Mpa | 6.3 | 6.3 | |
Maximum axial bearing of coolant supply | KN | 68 | 68 | |
Maximum jacking force of coolant supply on workpiece | KN | 20 | 20 |
ITEM | Length of workpiece | Length*Width*Height(mm) | Net weight |
TS2180 The information can as a reference of TS2280 | 1000 | 13000*4000*2500 | 53 |
2000 | 15000*4000*2500 | 56 | |
3000 | 17000*4000*2500 | 59 | |
4000 | 20000*4000*2500 | 63 | |
5000 | 22000*4000*2500 | 66 | |
6000 | 24000*4000*2500 | 69 | |
7000 | 26000*4000*2500 | 72 | |
8000 | 29000*4000*2500 | 76 | |
9000 | 31000*4000*2500 | 79 | |
10000 | 33000*4000*2500 | 82 |
![]() |
Anyang Xinheng Machine Tool Co. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |