TS21100/TS21160 deep hole drilling and boring machine
is a kind of deep-hole drilling machine, which can do drilling, boring and trepanning of heavy workpiece with big diameter.
During the machine process, the workpiece rotates slowly and the tool rotates in high-speed and do feeding. It uses BTA internal chip removal during the drilling process.
During the boring process, the cutting fluid in the boring bar is supplied to the front (head of machine) of the boring tool, and the cutting fluid and chip are discharged.
The technology of extra chip removal is used during trepanning process, and the machine is equipped with special trepanning tools, tool holder and fixture. According to the needs of machining, the machine is equipped with drilling (boring) rod box. The tools can do rotating and feeding.
|Capacity||Range of drilling diameter||mm||60-180||60-180|
|Maximum boring diameter||mm||1000||1600|
|Maximum boring depth||m||1-16||1-16|
|Range of trepanning diameter||mm||140-500||140-500|
|Workpiece clamp diameter range||mm||270-2000||270-2000|
|Spindle||Center height of spindle||mm||1250||1450|
|Spindle bore of headbox||mm||100||/|
|Taper hole of spindle||mm||140, 1:20||/|
|Range of spindle speeds||r/min||1-190 ( 3 kinds )||1-100 ( 2 kinds )|
|Drill box||Spindle bore of drill box||mm||120||120|
|Taper hole of drill box spindle||mm||140, 1:20||140, 1:20|
|Range of drill box speed||r/min||16-270 ( 12 kinds )||16-270 ( 12 kinds )|
|Feed||Range of feed speed ( stepless )||mm/min||5-500||5-500|
|Rapid speed of pallet||m/min||4||4|
|Motor||Main motor power||Kw||75||100|
|Motor power of drill box||Kw||45||45|
|Motor power of hydraulic pump||Kw||1.5kw, n=1440r/min||1.5kw, n=1440r/min|
|Motor power of rapid speed||Kw||7.5||7.5|
|Feed motor power||Kw||11 ( servo motor )||11 ( servo motor )|
|Motor power of cooling pump||Kw||5.5*4+11||5.5*4+11|
|Other||Span of guideway||mm||1600||1600|
|Rated pressure of cooling system||MPa||2.5||2.5|
|Flow of cooling system||L/min||100.200.300.400.700||100.200.300.400.700|
|Rated working pressure of hydraulic system||Mpa||6.3||6.3|
|Maximum axial bearing of coolant supply||KN||68||68|
|Maximum jacking force of coolant supply on workpiece||KN||20||20|
|ITEM||Length of workpiece (mm)||Length*Width*Height(mm)||Net weight (t)|
( The information can as a reference of TS21160 )