Spindle Hole 100mm Gold Supplier Spherical Lathe For Ball Surface C65160
ITEM | UNIT | C65160 |
Max. Dia. of spherical | mm | 1600 |
Min. Dia of spherical | mm | 1000 |
Dia. of spindle hole | mm | 100 |
Taper of hole of spindle | mm | 140 |
No. of spindle speeds | | 21(12) |
Range of spindle speeds | r/min | 3.15~315 |
Spindle reverse speeds | r/min | 3.5~291 |
Swivel angle of toolpost | ° | 55 |
Main power | kw | 30 |
Weight | t | 25.4 |
Length | mm | 6120 |
Width | mm | 2620 |
Height | mm | 2520 |
Tail frame
Mounted on the bed guide rail and moved vertically along this guide rail to adjust its position. The tail frame is mainly used to install the top, to support the long work piece, also can install the drill bit, reamer and so on the hole processing.
Feed box
Also called feeding box, feed movement are installed in the feed box shift gear, adjust its shift gear, can get the required feeding or pitch, through light poles or screw would transmit the motion to head for cutting.
Knife rack
There are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
![]() |
Anyang Xinheng Machine Tool Co. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |