Detailed Images
ITEM | UNIT | C61160 | |
CAPACITIES | Swing over bed | mm | 1600 |
Swing over carriage | mm | 1250 | |
Max.length of workpiece | mm | 3000 4000 5000 6000 8000 10000 12000 | |
Max.turning length | mm | 2800 3800 4800 5800 7800 9800 11800 | |
Pan of guideway | mm | 1100 | |
SPINDLE | Spindle nose | mm | A2-15 |
Spindle bore | mm | 100 | |
Taper hole of spindle | | Metric140 | |
Range of spindle speeds | r/min | Forward 3.15~315 Reverse 3.5~291 | |
No.of spindle speeds | | Forward 21 Reverse 12 | |
FEED | No.of Longitudinal and cross | | 56/56 |
Feed per revolution | mm | Longitudinal 0.1~12 Transverse 0.05~6 Up turret 0.025~3 | |
No. and range of metric thread | mm | 44;1~120 | |
No. and range of inch thread | | 31;28~1/4 | |
No. and range of module thread | mm | 45;0.5~60 | |
No. and range of dia. thread | | 38;1/2~56DP | |
TURRET | Distance of centerline and tool resting plane | mm | 53 |
Tool post swing range | | 90 | |
Max.travel of cross slide | mm | 740 850 900 900 | |
Max.travel of top slide | mm | 360 | |
Section of tool shank | mm | 50x380x380 | |
Travel of tool post (per turn of dials) | mm | 0.05(0.002 ) | |
TAILSTOCK | Dia. of tailstock | mm | 260 |
Travel of tailstock quill | mm | 300(12 ) | |
Taper hole of tailstock quill | | Metric80 | |
OTHERS | Main motor power | kw | 30 |
Length | mm | 6120 7120 8120 9120 11120 13120 15120 | |
Width | mm | 2058 2130 2330 2430 | |
Height | mm | 2200 2380 2480 2580 | |
Max.weight of workpiece | t | 16 |
![]() |
Anyang Xinheng Machine Tool Co. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |