ITEM | UNIT | CW61125B | |
CAPACITIES | Swing over bed | mm | 1250 |
Swing over carriage | mm | 865 | |
Max.length of workpiece | mm | 1500 2000 3000 4000 5000 6000 8000 10000 12000 | |
Max.turning length | mm | 1300 1800 2800 3800 4800 5800 7800 9800 11800 | |
Pan of guideway | mm | 755 | |
SPINDLE | Spindle nose | mm | A2-15 |
Spindle bore | mm | 130 | |
Taper hole of spindle | | 1:20/140 | |
Range of spindle speeds | r/min | forward 3.15~315 reverse 3.5~291 | |
No.of spindle speeds | | Forward 21 reverse 12 | |
FEED | No.of Longitudinal and cross | | 56/56 |
Feed per revolution | mm | Longitudinal 0.1~12;cross:0.05~6;top slide:0.025~3 | |
No. and range of metric thread | mm | 44;1~120 | |
No. and range of inch thread | | 31;28~1/4 | |
No. and range of module thread | mm | 45;0.5~60 | |
No. and range of dia. thread | | 38;1/2~56DP | |
turret | Distance of centerline and tool resting plane | mm | 48 |
Tool post swing range | | 90° | |
Max.travel of cross slide | mm | 520(20) | |
Max.travel of top slide | mm | 300 | |
Section of tool shank | mm | 45x260x260 | |
Rapid travel speeds | mm/min | Longitudinal:3740;cross:1870;Little slide:935 | |
TAILSTOCK | Dia. of tailstock | mm | 160(6) |
Travel of tailstock quill | mm | 300(12) | |
Taper hole of tailstock quill | | morse 6 | |
OTHERS | Main motor power | kw | 22 |
Length | mm | 4600 5100 6100 7100 8100 9100 11100 13100 15100 | |
Width | mm | 2150 | |
Height | mm | 1700 1825 2150 | |
Max.weight of workpiece | kg | 6000 |
![]() |
Anyang Xinheng Machine Tool Co. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |