Send Inquiry
| Home | » Products | » Heavy Duty Lathe | » C61250 swing over bed 2500mm conventional heavy duty lathe with service |
| UNIT | C61250 | ||
| CAPACITIES | Swing over bed | mm | 2500 |
| Swing over carriage | mm | 2200 | |
| Max.length of workpiece | mm | 3000~20000 | |
| Max.torque of face chuck | kg.m | 8000 | |
| Form of bed guide way | 3 GUIDE WAY | ||
| Span of guide way | mm | 1800 | |
| Max.cutting force | kg | 16000 | |
| Max.weight of workpiece | t | 32 | |
| Taper hole of spindle | 75° | ||
| SPINDLE | Dia.chuck D | mm | 2000 |
| Range of spindle speeds | r/min | 0.8~160 | |
| No.of spindle speeds | STEPLESS | ||
| Feed motion level | 18 | ||
| Range of longitudinal feed | mm | 0.125~48 | |
| Range of feed | 0.063~24 | ||
| TAILSTOCK | Metric thread | mm | 2~40 |
| Inch thread | mm | 1~14 | |
| Module thread | mm | 1.5~20 | |
| Max.travel of cross slide | mm | 725 | |
| Max.travel of top slide | mm | 600 | |
| Section of tool shank | mm | 70 | |
| Dia. of tailstock | mm | 300 | |
| OTHERS | Travel of tailstock quill | mm | 300 |
| Taper hole of tailstock quill | mm | 100(1:7) | |
| Rapid speed of tailstock | mm/min | 3000 | |
| Rapid speed of tailstock quill | mm/min | 664 | |
| Main motor power | kw | 75 | |
| Length | mm | 13577-21577 | |
| | Width | mm | 2580/2655 |
+86 13526135763
|
 |
Anyang Xinheng Machine Tool Co. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |
