C61160 Cheap Metal Processing Large Gap Bed Lathe Made In China
Detailed Images
Item |
UNIT |
C61160 |
|
CAPACITIES |
Swing over bed |
mm |
1600 |
Swing over carriage |
mm |
1250 |
|
Max.length of workpiece |
mm |
3000 4000 5000 6000 8000 10000 12000 |
|
Max.turning length |
mm |
2800 3800 4800 5800 7800 9800 11800 |
|
Pan of guide way |
mm |
1100 |
|
SPINDLE |
Spindle nose |
mm |
A2-15 |
Spindle bore |
mm |
100 |
|
Taper hole of spindle |
|
Metric140 |
|
Range of spindle speeds |
r/min |
Forward 3.15~315 Reverse 3.5~291 |
|
No.of spindle speeds |
|
Forward 21
Reverse 12 |
|
FEED |
No.of Longitudinal and cross |
|
56/56 |
Feed per revolution |
mm |
Longitudinal.1~12Transverse0.05~6 Up turret 0.025~3 |
|
No. and range of metric thread |
mm |
44x1~120 |
|
No. and range of inch thread |
|
31x28~1/4 |
|
No. and range of module thread |
mm |
45;0.5~60 |
|
No. and range of dia. thread |
|
38;1/2~56DP |
|
TURRET |
Distance of centerline and tool resting plane |
mm |
53 |
Tool post swing range |
|
90 |
|
Max.travel of cross slide |
mm |
740 850 900 900 |
|
Max.travel of top slide |
mm |
360 |
|
Section of tool shank |
mm |
50x80x380 |
|
Travel of tool post (per turn of dials) |
mm |
0.05(0.002) |
|
TAILSTOCK |
Dia. of tailstock |
mm |
260 |
Travel of tailstock quill |
mm |
300(12) |
|
Taper hole of tailstock quill |
|
Metric80 |
|
OTHERS |
Main motor power |
kw |
30 |
Length |
mm |
6120 7120 8120 9120 11120 13120 15120 |
|
Width |
mm |
2058 2130 2330 2430 |
|
Height |
mm |
2200 2380 2480 2580 |
|
Max.weight of workpiece |
t |
16 |
Bed
It is a large basic part of the lathe with high precision and high precision guide rail. Used to support and connect the various parts of the lathe, and ensure that the parts are accurate in relative position at work.
Tail frame
Mounted on the bed guide rail and moved vertically along this guide rail to adjust its position. The tail frame is mainly used to install the top, to support the long work piece, also can install the drill bit, reamer and so on the hole processing..
Slip board box
Lathe feed movement control box, in which the light poles and the tool carrier of screw rotation movement into linear motion mechanism, through light bar transmission to realize tool post transverse and longitudinal feed movement of the feed movement and fast moving, and through the screw drive tool post for vertical linear motion, so that the thread cutting.
Advantages
![]() |
Anyang Xinheng Machine Tool Co. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |