Ball Turning Lathe Machine
Product parameters
ITEM | UNIT | C6555 |
Max. Dia. of spherical | mm | 550 |
Min. Dia. of spherical | mm | 50 |
Dia. of spindle hole | mm | 100 |
Taper of hole of spindle | mm | 120 |
No. of spindle speeds |
| 18 |
Range of spindle speeds | r/min | 6~800 |
Spindle reverse speeds | r/min | 11~838 |
Swivel angle of toolpost | ° | 90 |
Main power | kw | 11 |
Weight | t | 4.4 |
Length | mm | 3725 |
Width | mm | 1280 |
Height | mm | 1690 |
Spindle box: also called headstock, it is the main task of the main motor rotation movement coming after a series of variable speed institutions make main shaft gets the different rotating speed of the positive and negative two turn, at the same time the spindle box gives impetus to the movement into the box.
Feed box: also called feeding box, feed movement are installed in the feed box shift gear, adjust its shift gear, can get the required feeding or pitch, through light poles or screw would transmit the motion to head for cutting.
Screw and light bar: to connect the box with the slide box, and the movement and power of the feed box to the slide box, to make the slide box to get the longitudinal straight movement. The screw is specially designed for turning the various threads of the car.
Knife rack: there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
Tail frame: mounted on the bed guide rail and moved vertically along this guide rail to adjust its position. The tail frame is mainly used to install the top, to support the long work piece, also can install the drill bit, reamer and so on the hole processing.
![]() |
Anyang Xinheng Machine Tool Co. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |