Home | » Products | » Ball Lathe Machine | » Ball Lathe Machining Sphere Spindle Hole 100mm C65180 Manufacturer |
Ball Lathe Machining Sphere Spindle Hole 100mm C65180 Manufacturer
ITEM | UNIT | C65180 |
Max. Dia. of spherical | mm | 1800 |
Min. Dia. of spherical | mm | 1200 |
Dia. of spindle hole | mm | 100 |
Taper of hole of spindle | mm | 140 |
No. of spindle speeds | | 21 |
Range of spindle speeds | r/min | 3.15~315 |
Spindle reverse speeds | r/min | 3.5~291 |
Swivel angle of toolpost | ° | 55 |
Main power | kw | 30 |
Weight | t | 27.4 |
Length | mm | 6220 |
Width | mm | 2720 |
Height | mm | 2620 |
Lathe feed movement control box, in which the light poles and the tool carrier of screw rotation movement into linear motion mechanism, through light bar transmission to realize tool post transverse and longitudinal feed movement of the feed movement and fast moving, and through the screw drive tool post for vertical linear motion, so that the thread cutting.
Also called feeding box, feed movement are installed in the feed box shift gear, adjust its shift gear, can get the required feeding or pitch, through light poles or screw would transmit the motion to head for cutting.
Also called headstock, it is the main task of the main motor rotation movement coming after a series of variable speed institutions make main shaft gets the different rotating speed of the positive and negative two turn, at the same time the spindle box gives impetus to the movement into the box. The spindle in the main shaft is the key part of the lathe.
![]() |
Anyang Xinheng Machine Tool Co. Ltd.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |